Swift PET-G Black
Swift PET-G, black, 1.75mm, 250g/1kg
Modified by poli-glycol (ethylene terapthalate) – is an amorphical thermoplastic copolyesters characterized by exquisite resistance and optical properties. Its significant advantage is that it may be used in contact with food and cosmetics.
Filament SWIFT PET- G is dedicated mostly to people who professionally deal with FDM technology print-outs. It is more elastic and softer than PLA or ABS. It has very low shrinkage factor and therefore it is suitable for large-sized print-outs. When printing parameters are appropriately selected, printing layers bond perfectly and this gurantees the best printing quality and leaves you satisifed. Swift PET-G has high chemical resistance to acids , alkalis and water. Printing process is free of unpleasant odours so printing with PET-G is very nice! Furthermore, an adequate temperature profile allows for the so-called tossing-free print, which is a considerable advantage as for PET-G.
| Elongation at break | 21.95% |
|---|---|
| Abrasive | No |
| Tensile strength | 40.95 MPa @ Break |
| Spool size | 1 kg |
| Solubility | insoluble |
| Heat deflection temperature | 80°C |
| Melting point | > 220°C |
| Precision | ±0.05 mm |
| RAL Color | None |
| Brand | PrintME |
| Density | 1.15 g/cm3 |
| Glitter | No |
| Filament weight | 1 kg |
| Heated bed | 30 °C - 50 °C |
| Printing temperature | 220 °C - 260 °C |
| Material | PET-G |
| Filament diameter | 1.75mm |
| Color | Black |