Flex TPU 40D Blue

€21.96 €18.30
In stock
Only 1 left

Flexible TPU 40D, blue, 1.75mm, 0.45kg

Thermoplastic polyurethane, or TPU, is a very common form of elastic polymer, or elastomer, capable of being used on any properly equipped FDM 3D printer. Of the many kinds of flexible 3D printer filaments, TPU is slightly more rigid, making it easier to extrude and use. It is a medium-strength material with very high flexibility and durability, able to withstand much higher compressive and tensile forces than its more common counterparts PLA and ABS.

When printing, TPU exhibits minimal warping and shrinkage and, like PLA, doesn’t require a heated bed, although it is recommended. The ideal print temperature is between 210 and 230 °C, but this may vary from manufacturer to another. TPU doesn’t produce any notable levels of fumes while printing, but it’s not considered to be food safe. And though it’s a non-soluble material, it is hygroscopic, meaning that it will slowly absorb moisture from its surroundings, degrading over time.

More Information
Elongation at break 806.81%
Abrasive No
Tensile strength 22.83 MPa
Spool size 0.5kg
Solubility insoluble
Hardness (Shore D) 40D / D2240
Precision ±0.05 mm
RAL Color None
Brand PrintME
Density 1.15 g/cm3
Glitter No
Filament weight 0.45 kg
Heated bed 60 °C - 70 °C
Printing temperature 220 °C - 245 °C
Material TPU
Filament diameter 1.75mm
Color Blue
Write Your Own Review
You're reviewing:Flex TPU 40D Blue
Search engine powered by ElasticSuite Copyright ©2009-2020 Mediaware, s.r.o., All Rights Reserved.