CPE CF112 Carbon

€51.58 €42.98
In stock
SKU
CPE-CF112-Carbon
WE DO NOT HAVE THIS ITEM IN STOCK BUT WE WILL ORDER IT FROM MANUFACTURER AND SHIP IT TO YOU ASAP.
 

Fillamentum CPE CF112 Carbon, 1.75mm, 600g

CPE CF112 Carbon is a high-tech material for the FFF (also known as FDM) 3D printing technology.

Carbon fibers reinforced CPE HG100 filament is developed for its pressure resistance, hardness and surface effect.

  • Good interlayer adhesion, easy printing, low warping
  • Matte finish
  • Wear resistance, resistant to long-term load
  • Chemical resistance
  • Recyclable, bio-based, BPA free, styrene free
  • It's hardness comparable to Vinyl 303
  • High-technical durable long-life material

Description:

Material used for production of CPE CF112 Carbon is optimized for the best results in FDM 3D printing technology. The material used for CPE HG100 filament is reinforced with milled carbon fibres to improve some properties.

This material is optimal for applications with long-term load. It has higher wear resistance, heat distortion temperature, hardness and chemical resistance in comparison with CPE HG100.

The contained fibres ensure functionality, great printability, dimensional stability and layer adhesion. The objects have nice smooth surface.

It may be used for production of electrical and electronic equipment. It doesn’t contain the restricted substances. The use for application that come into contact with food is not recommended.

For filaments with fillers, Fillamentum guarantees dimensions within the tole- rance of +/-0,10 mm, which is strictly controlled throughout the production.

The material contains milled carbon fibres 100 Μm long.

Note: The CPE CF112 Carbon filament has abrasive properties. It means that it will accelerate the nozzle-wear of brass nozzles faster than unfilled filaments. The hardened steel nozzles are recommended.

More Information
Elongation at break8 % / ISO 527
AbrasiveYes
Tensile strength52.4 MPa / ISO 527
Spool size0.6kg
Solubilityinsoluble
Hardness (Shore D)77D / ISO 7619
Precision±0.10 mm
RAL ColorNone
BrandFillamentum
Density1.16 g/cm3
GlitterNo
Filament weight0.6 kg
Filament length200m
Heated bed70 °C - 85 °C
Printing temperature250 °C - 270 °C
MaterialCPE CF112
Filament diameter1.75mm
ColorBlack
Copyright ©2009-2020 Mediaware, s.r.o., All Rights Reserved.